Apply to: Satellites, main stations, Voyager, all booster stations
No or too low rinse pressure
Go through the checklist below to identify the source of the problem you are experiencing. If the problem persists, we recommend that you notify the hygiene manager or plant manager to get technical assistance for the equipment.
1. Check that the ball valve on the inlet is open
2. Check that the boosted water supply is ON
3. Check that the inlet pressure is between 1.5 and 10 bar (23 and 145 psi) as prescribed in the manual
4. Make sure not to exceed the maximum no. of users on the same supply station
5. Check that the water supply is sufficient in accordance with the technical specifications
6. If you experience excessive water consumption, check that you are using an original System Cleaners rinse nozzle